Filter
Top Products
Troubleshooting and Removal/Replacement Procedures
3–8
Removal/Replacement Procedures
The removal/replacement procedures for the DDS-3 drive follow.
CAUTION: Electrostatic charges can damage the integrated circuits on printed
circuit boards. To prevent such damage from occurring, follow
proper ESD precautions.
Field Replaceable Units
The following components are authorized for field replacement.
Description Part Number
DDS-3, Replacement C1537–67201
DDS-3, Exchange C1537–69201
Powering Off the System
Before performing the removal/replacement procedures, observe the following
precautions:
1. Refer to the owner’s guide that came with your system for the procedures to power
off the system.
2. Unplug the system unit power cord and the power cords of any peripheral devices
from the power source.
3. Unplug the system unit power cord from the back of the system unit.
WARNING: Failure to properly shut down and remove power from the system can
create a personal hazard, or may result in hardware damage or data
corruption.