Filter
Top Products
50
ADVANCED FUNCTIONS
through the available characters. To move to the next character,
either press the 3Button, or press the next desired Alphanumeric
Key. Press the OK Button when you have finished.
To execute an activity, press the Activity Button, then the Alphanumeric
Key you selected as the command button in Step 4. If you selected
the AVR Power On or Off Button in Step 4, you do not need to press
the Activity Button first.
To view the steps previously programmed for an activity without
executing it:
1. Press and hold the AVR Settings Button for 3 seconds. The
remote will enter Program mode, and its Main Menu will be
displayed.
2. Use the 1/5 Buttons to scroll to the Activity option, and press
the OK Button.
3. Use the 1/5 Buttons to select the Read Activity option, and press
the OK Button.
4. Use the 1/5 Buttons to select the command button, and press
the OK Button.
5. Use the 1/5 Buttons to scroll through the steps programmed
into the activity. It is not possible to make any changes. When
you have finished, press the OK Button or the Back/Exit Button
to exit Program mode.
It isn’t possible to “edit” a command within an activity. To delete the
activity:
1. Press and hold the AVR Settings Button for 3 seconds. The remote
will enter Program mode, and its Main Menu will be displayed.
2. Use the 1/5 Buttons to scroll to the Activity option, and press
the OK Button.
3. Use the
1/5 Buttons to select the Delete Activity option, and
press the OK Button.
4. Use the 1/5 Buttons to select the command button or title, and
press the OK Button. The activity, including any title you gave it,
will be deleted.
Punch-Through Programming
The punch-through feature allows you to operate one component,
while setting certain groups of controls to operate another component.
For example, while using the AVR controls for surround modes and
other audio functions, you may operate the transport controls of
your DVD player. Or while using the remote to control video functions
on your TV, you may use your cable box to change channels.
To program punch-through control while operating any device:
1. Press and hold the AVR Settings Button for 3 seconds. The
remote will enter Program mode, and its Main Menu will be
displayed.
2. Use the 1/5 Buttons to scroll to the Punch-Through option,
and press the OK Button.
3. Use the 1/5 Buttons to select either Channel or Transport
control, and press the OK Button.
4. Use the 1/5 Buttons to scroll to the device in use, and press
the OK Button. For example, to change channels using the cable
or satellite set-top box while using the remote to operate the TV,
select the TV source in this step.
5. Use the
1/5 Buttons to select the punch-through device
(CBL/SAT in the example given in step 4), press the OK Button,
and the Punch-Through programming will be saved.
To undo punch-through programming, follow the same steps as
above, but select the same Source in Steps 4 and 5.
NOTE: The Volume and Mute controls are always dedicated
to the AVR.
Back Light
The AVR remote is equipped with a back light to illuminate the keys
and LCD Display to facilitate its use in a darkened home theater
environment.
To turn the back light on or off at any time, press the Back Light Button.
The back light’s turn-on mode may be programmed:
• Normal: The back light stays off unless the Back Light Button
is pressed.
• On Full: The back light will turn on any time a key is pressed.
In both modes, the back light will remain on for 5 seconds after the
last button press, and then turn off automatically.
To program the remote’s back light mode:
1. Press and hold the AVR Settings Button for 3 seconds. The
remote will enter Program mode, and its Main Menu will be
displayed.
2. Use the
1/5 Buttons to scroll to the Back Light option, and press
the OK Button.
3. Use the 1/5 Buttons to select the Normal or On Full option, and
press the OK Button to finish.
Remote Reset
To reset the remote to its factory defaults, erasing all product
codes, learned codes, activities and other user programming:
1. Press and hold the AVR Settings Button for 3 seconds. The
remote will enter Program mode, and its Main Menu will be
displayed.
2. Use the 1/5 Buttons to scroll to the Remote Reset option, and
press the OK Button. The process may take a few minutes,
depending on the amount of user programming requiring erasure.
Please wait until the “Remote Reset Complete” message appears
before pressing any keys.
AVR 7550HD OM.qxd 2/25/09 11:53 AM Page 50