Filter
Top Products
<8>VIDEO PCB (40-1) REMOVAL
1. Remove the Top-cover, referring to the previous step<1>.
2. Disconnect the lead wire (BN41-6P) on the Tone PCB (37-3) from connector (CN41) on the Video PCB (40-1
3.Disconnect the connector (CN15-Card cable) on the Input PCB (39-1) from connector (CN43) on the Video PCB (40-
1).
4. Remove 6 screws (S8) and then remove the Video PCB (40-1).
<9>I-POD PCB (41) REMOVAL
1. Remove the Top-cover, referring to the previous step<1>.
2. Disconnect the lead wire (BN42-5P) on the INPUT PCB (39-1) from connector (CN42) on the I-POD PCB (41).
3. Disconnect the lead wire (BN45-4P) on the INPUT PCB (39-1) from connector (CN45) on the I-POD PCB (41).
4. Disconnect the lead wire (BN44-4P) on the Download PCB (37-9) from connector (CN42) on the I-POD PCB (41).
5. Remove 2 screws (S13) and then remove the I-POD PCB (41).
<10>INPUT PCB (39-1) REMOVAL
1. Remove the Top-cover, referring to the previous step<1>.
2. Remove the Connect PCB (37-7).
3. Disconnect the lead wire (BN18-5P) on the Digital input PCB (37-8) from connector (CN18) on the Input PCB (39-1).
4. Disconnect the connect (BN72-Card canle)) on the Fip PCB (37-1) from connector (CN72) on the Input PCB (39-1)
5. Remove 11 screws (S8,S11) and then remove the Input PCB (39-1).
<11>Download PCB (37-9) REMOVAL
1.Remove the Top-cover, referring to the previous step<1>.
2.Disconnect the connector (CN15) from lead wire (BN15-8P) on the Fip PCB (37-2)
3.Remove 2 screws (S4) and then remove the Download PCB (37-9).
<12>POWER TRANS (36) REMOVAL
1. Remove the Top-cover, referring to the previous step<1>.
2. Disconnect the connector (BN20,BN96) on the Trans PCB (40-4) from lead wire (CN20-3P,CN96-6P) on the
Main PCB (38-1).
3. Remove 4 Trans screws (S9) and then remove the Power Trans (36).
<13>MAIN PCB ASS’Y (38-1) REMOVAL
1. Remove the Top-cover, referring to the previous step<1>.
2. Remove the Tuner module, referring to the previous step<7>.
3. Remove the Video PCB, referring to the previous step<8>.
4. Remove the Input PCB, referring to the previous step<9>.
5. Disconnect the connector (CN80) from lead wire (BN80-11P) on the Fip PCB (37-1).
6. Disconnect the connector (CN91) from lead wire (BN91-3P) on the Moms PCB (37-5).
7. Disconnect the connector (CN20,BN96) from lead wire (CN20-3P,BN96-8P) on the Trans PCB (40-4,40-5)
8. Remove 11screws (S1-1EA, S4-2EA, S6-2EA, S8-6EA) and then remove the Main PCB ASS’Y(38-1).
DVD47 harman/kardon
21