Filter
Top Products
DVI DL 201 Tx/Rx • Installation
Rack mounting procedures
The unit can be mounted in the front or rear of:
RSU 126 (6" deep 1U universal rack shelf kit: PN • 60-190-10)
RSB 126 (6" deep 1U basic rack shelf: PN • 60-604-10)
RSU 129 (9.5" deep 1U universal rack shelf kit: PN • 60-190-01)
RSB 129 (9.5" deep 1U basic rack shelf: PN • 60-604-01)
To mount the unit, follow these instructions:
1. Remove rubber feet if these have been installed on the
bottom of the unit.
2. Align the unit on the shelf and secure it to the shelf with
two 4-40 x 3/16" screws in diagonally opposite corners (see
the gure below, which shows installation using the
RSU 129 shelf).
3. Install false faceplate(s) or other unit(s) to the rack shelf.
4. Attach the shelf to the rack with the four provided
10-32 x 3/4" bolts
Use 2 mounting holes on
opposite corners.
(2) 4-40 x 3/16"
Screws
1U Universal Rack Shelf
Front false
faceplate
uses 2
screws.
HalfRackVersaToolsStandardShelf
1/2 Rack Width Front False
Faceplate
Installing the DVI DL 201 Tx on a rack shelf
2-3