Filter
Top Products
Installation Manual 27
Dimensions and Specifications
Return Policy IndexSpecifications
A.2 Physical specifications
A.3 Power supply – Models 2400S Analog and PROFIBUS-DP
Housing Polyurethane-painted aluminum
Optional: 304L stainless steel with surface finish of 32 RA
Weight Transmitter is mounted integrally with sensor. For weight of flowmeter, see product
data sheet for sensor.
Mounting and cabling Model 2400S transmitters are mounted integrally with sensor. The transmitter can
be rotated on the sensor up to 360° in 45° increments.
Cable entry holes are available with 1/2–NPT and M20 options (refer to the 2400S
Product Data Sheet for ordering codes).
Self-switching AC/DC input, automatically recognizes supply voltage.
Complies with low voltage directive 2006/95/EC per EN 61010-1 (IEC 61010-1) with amendment 2.
Installation (Overvoltage) Category II, Pollution Degree 2.
AC • 85–265 VAC
•50/60 Hz
• 4 watts typical, 7 watts maximum
DC • 18–100 VDC
• 4 watts typical, 7 watts maximum
Fuse IEC 127-1.25 fuse, slow blow
1/2–NPT threads
Chamfer No chamfer
M20 threads