Filter
Top Products
Installation Manual 65
Specifications
Output Wiring – Configurable I/O SpecificationsOutput Wiring – Fieldbus/PROFIBUSOutput Wiring – Intrinsically Safe Output Wiring – Configurable I/O SpecificationsOutput Wiring – Fieldbus/PROFIBUSOutput Wiring – Intrinsically Safe Output Wiring – Configurable I/O SpecificationsOutput Wiring – Fieldbus/PROFIBUSOutput Wiring – Intrinsically Safe Output Wiring – Configurable I/O SpecificationsOutput Wiring – Fieldbus/PROFIBUSOutput Wiring – Intrinsically Safe
A.4.3 Interface/display
The transmitter may be ordered with or without a display. The characteristics of the display are as
follows:
• Segmented 2-line display with LCD screen with optical controls and flowmeter-status LED is
suitable for hazardous area installation
- LCD line 1 lists the process variable, line 2 lists engineering unit of measure through a
non-glare tempered glass lens
- Display controls feature optical switches that are operated through the glass with a red
LED indicator to show that the “button” has been pressed
• To facilitate various mounting orientations, the display can rotate 360° on the transmitter in
90° increments
A.4.4 Weight
For the weight of a transmitter mounted integrally with a sensor, refer to the sensor specifications.
The 4-wire remote transmitter weighs:
• With display: 8 lb (3,6 kg)
• Without display: 7 lb (3,2 kg)
The 9-wire remote transmitter/core processor assembly weighs:
• With display: 14 lb (6,3 kg)
• Without display: 13 lb (5,9 kg)
A.4.5 Dimensions
Figures A-1 through A-5 show the dimensions of the Model 1700 or 2700 transmitter with and
without a display, the transmitter/core processor assembly with and without a display, and the stand-
alone core processor. For dimensions of integrally mounted transmitters and sensors, refer to the
product data sheet for your sensor.