Filter
Top Products
12 Micro Motion
®
Model 1700 and 2700 Transmitters
Installing the Transmitter
Figure 2-4 Transmitter components – 4-wire remote or remote core processor with
remote transmitter installations
2.4.3 9-wire remote installations
If you chose a 9-wire remote installation (see Figure 2-1), see Figure 2-5 for a diagram of the
mounting bracket supplied with the transmitter/core processor assembly. Ensure that the transmitter is
mounted and oriented in a way that will allow easy access to the terminals and to the display (if your
transmitter has a display).
Figure 2-5 9-wire remote – Wall mount or pipe mount
Ground screw
Mounting bracket
Main enclosure
Junction housing
Mating connector
socket
Mating connector
Junction end-cap
4 X Cap screws
(4 mm)
Conduit opening
for 4-wire cable
Mounting bracket
(wall mount)
Mounting bracket
(pipe mount)
Note: If possible, maintain 8–10
″
(200–250 mm) clearance
at the rear of the transmitter.