Filter
Top Products
ELECTRO-VOICE
®
X-Line Very Compact
TM
Rigging Manual15
Figure 5f:
XGS-4 Groundstack Details/Dimensions
XGS-4
The XGS-4, shown in Figure 5f, is a pair of rails that may be used to groundstack XLVC
loudspeaker systems. Each rail is an L-bracket that has multiple sets of front hinge bar rigging and
rear swing arm rigging that mate with the front rigging tube and rear rigging channels on the
bottom XLVC loudspeaker enclosure rigging.
The XGS-4 may be used to stack a single column of XLD281 systems, a single column of XLE181
systems or an XLD281 column and XS212 column combined.
XLD/XS DOLLY
The XLD/XS DOLLY, shown in Figure 5g, is a dolly for transporting XLD281 and/or XS212
loudspeaker systems. The dolly will accommodate two columns of loudspeaker systems – two
columns of XLD281 systems, two columns of XS212 systems or an XLD281 column and an
XS212 column combined. XLD281 systems may be stacked 6 high on the dolly. XS212 systems
may be stacked 3 high on the dolly. The systems are strapped down with ratchet straps and offer
side panel kits for additional protection during transport.
SP12.6
The SP12.6 is a side panel kit to be seamlessly integrated into the XLD/XS Dolly when additional
protection is needed during transport. The SP12.6 allows for protection of two columns of six
XLD281 loudspeaker systems for a total of (12) XLD281 loudspeaker systems, for protection of
two columns of three XS212 loudspeaker systems for a total of (6) XS212 loudspeaker systems,
or for protection of combined columns of (6) XLD281 loudspeaker systems and (3) XS212
loudspeaker systems.
SP8.4
The SP8.4 is a side panel kit to be seamlessly integrated into the XLD/XS Dolly when additional
protection is needed during transport. The SP8.4 allows for protection of two columns of four
XLD281 loudspeaker systems for a total of (8) XLD281 loudspeaker systems, for protection of two
columns of two XS212 loudspeaker systems for a total of (4) XS212 loudspeaker systems, or for
protection of combined columns of (4) XLD281 loudspeaker systems and (2) XS212 loudspeaker
systems.
L-Extrusion (Left)
Detent Pins
(4 per side)
L-Extrusion (Right)
Swing Arms
(2 per side)
Hinge Bars
(2 per side)