Filter
Top Products
ELECTRO-VOICE
®
X-Line Very Compact
TM
Rigging Manual
XLVC-BGK
The XLVC-BGK, shown in Figure 5d, is a bottom grid kit that allows the XLD GRID to be attached
to the bottom of the XLD281 loudspeaker systems or the XLE GRID to be attached to the bottom
of the XLE181 loudspeaker systems. The bottom grid can then be used to pull back a column of
XLVC loudspeaker systems to achieve a greater downward tilt than gravity would allow without a
pull back.
The top of all XLVC loudspeaker systems have hinge bars mounted in the top of the front rigging
tubes and swing arms mounted in the top of the rear rigging channels. However, the rigging tubes
and channels are open at the bottom of all XLVC system rigging to accept hinge bars and swing
arms from and enclosure below. The XLVC-BGK consists of a pair of XLVC front hinge bars, a pair
of XLVC rear swing arms and a set of quick-release rigging pins for those bars and arms.
Figure 5c:
CBEAM Rigging Dimensions and Weights
13