Electro-Voice R300 Headphones User Manual


  Open as PDF
of 32
 
4
01
QUICK SETUP: receiver
1.Donotconnectthereceivertoanyotherequipmentyet!
2.ConnectthetwoAntennastothereceiver.
3.Installthebladesintothepowersupply,plugitintothebackofthereceiver,
andintoanoutlet.
4.PressthePOWERswitch.Displaywilllightup.
5.Pressandholdthe buttonuntilCLEARSCANscrollsacrossthescreen.
6.WhenCLEARSCANstops,thereceiverwillbesettotheclearestchannel.
7.Turnthereceiveroffandconnectthemixerorotheraudiosystemtothereceiver
XLRConnectororthe¼inchLineLevelJack.
8.Settheaudiomixerorothersysteminputleveltominimum.
9.PressthePowerswitchbuttoninagain.
Receiver “Quick Set-up” is complete.
 previous next