Electro-Voice R300 Headphones User Manual


  Open as PDF
of 32
 
10
DETAILED coMponent descriptions
4. ClearScan: Thisfeatureautomatestheprocessofndingaclearchannel.
a.Toscanfortheclearestchannelinagroup,pressandhold untilCLEARSCAN
appearsinthedisplay,thenreleasethebutton.
b.Whenthescaniscomplete,thedisplaywillshowtheclearestavailablechannel.
c.UsetheSYNCbuttontotransferthenewchannelasinstep3.
5.DuringsetupmakesurethemixeroramplierinputusedfortheR300ismutedor
turneddowntoaminimumlevel.
6.Pluganaudiocable(notsupplied)intothe3pinXLRor¼inchoutputoftheR300.
Note:TheXLRconnectoristhepreferredconnectionsincetheoutputisbalancedandwillbe
moreimmunetonoiseforlongerrunsofcablealthougheithercanbeusedwithgoodresults.
Setthebalancedoutputlevelonthebackpanelto12o’clock(midwayintherange)tostartand
adjustlaterifnecessary.Ifthe¼inchunbalancedoutputisused,startwithadjustmentswitchin
the-10dBsetting.
02
 previous next