Electro-Voice R300 Headphones User Manual


  Open as PDF
of 32
 
16
DETAILED coMponent descriptions
2.2 | Handheld Transmitter Setup & Operation
1. Insert Batteries.
a.Removethebatterycompartmentcoverbyunscrewingitcompletely.
b.InserttwoAAbatteriesasshown,slidingoneupintothehousingtomakeroomfor
theother.
2.Turntheunitonbypressingandholdingtheon/offbuttonfor3seconds,andthedisplaywilllightup.
3.Ifanewchannelisdesired,useEZsyncasinSection2.1andclosebatterycompartment.
4. Verify reception.
a.WiththetransmitterandreceiveronamatchingChannel,themainreceiverdisplay
shouldbeindicatingaRFsignalonthebargraph.
b.SpeakintothemicrophoneandtheAudioMeterbargraphshouldindicateaudio
signalpresence.
c. Ifthelevelmetersdonotshowreception,makesurethechannelsarematchingand
refertothetroubleshootingsection.
02
 previous next