Filter
Top Products
E L A N H O M E S Y S T E M S
Page 70 © ELAN Home Systems 2009 • All rights reserved.
DT22 INSTALLATION MANUAL
Tune
Command:
&DT,dd,TUNE,fffff<cr>
dd = ST, R1, R2
fffff = Desired Frequency
Function:
Tune to the given frequency.
FM: desired frequency divided by 10 kHz.
EXAMPLE: &DT,R1,TUNE,9810 (Tunes to 98.1 MHz)
AM: desired frequency divided by 1 kHz.
EXAMPLE: &DT,R1,TUNE,630 (Tunes to 630 kHz)
Not all values are valid. Valid values depend on band and region.
Command:
&DT,dd,TUNE,ccc <cr>
dd = ST, S1, S2
ccc = SIRIUS Channel Number (no leading zeros)
Function:
Tunes to specific SIRIUS channel.
EXAMPLE: &DT,S1,TUNE,8<cr> (Tunes to 80’s channel)
Not all values are vaild. Valid values depend on SIRIUS subscription.
Command:
&DT,dd,TUNE,UP<cr>
dd = ST, R1, R2, S1. S2
Function:
Step up one frequency step/channel number.
Actual step size depends on band, region and SIRIUS subscription.
Command:
&DT,dd,TUNE,DOWN<cr>
dd = ST, R1, R2, S1, S2
Function:
Step down one frequency step/channel number.
Actual step size depends on band, region and SIRIUS subscription.
Query:
&DT,dd,TUNE,?<cr>
dd = ST, R1, R2, S1, S2
Function:
Request the currently tuned frequency/channel number.
This response will also be sent as unsolicited feedback.