Filter
Top Products
E L A N H O M E S Y S T E M S
© ELAN Home Systems 2009 • All rights reserved. Page 65
DT22 INSTALLATION MANUAL
dd = ST, R1, R2, S1, S2
Function:
Query the desired tuner’s preset group.
This response will also be sent as unsolicited feedback.
Response:
*DT,R1,GROUP,A<cr>
or
*DT,R1,GROUP,B<cr>
or
*DT,R1,GROUP,C<cr>
or
*DT,R1,GROUP,D<cr>
Preset
Command:
&DT,dd,PRESET,UP<cr>
dd = ST, R1, R2, S1, S2
Function:
Go to next preset on the desired tuner.
Command:
&DT,dd,PRESET,DOWN<cr>
dd = ST, R1, R2, S1, S2
Function:
Go to previous preset on the desired tuner.
dd = ST, R1, R2, S1, S2
Query:
&DT,dd,PRESET,?<cr>
dd = ST, R1, R2, S1, S2
Function:
Query current preset of the desired tuner.
This response will also be sent as unsolicited feedback.
Response:
*DT,R1,PRESET,15<cr> (Tuned to preset 15 in current group)
or
*DT,R1,PRESET,0<cr> (Not tuned to a preset now)
Command:
&DT,dd,PRESET,mm<cr>
dd = ST, R1, R2, S1, S2
mm = 1 - 99
Function:
Tunes to preset mm.
Command:
&DT,dd,PRESET,SAVE<cr>