Filter
Top Products
E L A N H O M E S Y S T E M S
Page 16 © ELAN Home Systems 2009 • All rights reserved.
DT22 INSTALLATION MANUAL
VIA!NET
Use the VIA!NET ports when controlling the DT22 with ELAN Touch Panels, SC-1 Serial Controller, SS1 System
Station and/or other VIA!NET devices. The VIA!NET ports on the DT22 can be daisy-chained between chassis and
other VIA!NET devices.
Use an RJ-45 to RJ-45 interconnect cable to make all VIA!NET connections.
Use the following diagram when connecting a S86A/S86P and not using an SPP.
VIA!NET Connections
If there is not a System SS1 or System SC1 in the system, make the following connections.
VIA!NET Connections