Filter
Top Products
E L A N H O M E S Y S T E M S
© ELAN Home Systems 2009 • All rights reserved. Page 69
DT22 INSTALLATION MANUAL
Response:
*DT,R1,SIGNAL,100<cr>
Preset Scan
Command:
&DT,dd,SCAN,UP<cr>
dd = ST, R1, R2, S1, S2
Function:
Begin scanning up through all presets in the current group.
Each preset is played for 10 seconds.
Send any other command to stop scanning.
Command:
&DT,dd,SCAN,DOWN<cr>
dd = ST, R1, R2,S1, S2
Function:
Begin scanning down through all presets in the current group.
Each preset is played for 10 seconds.
Send any other command to stop scanning.
AM/FM Band
Command:
&DT,dd,BAND,AM<cr>
dd = ST, R1, R2
Function:
Switch to AM band on desired tuner.
This will also switch to the last AM station played on this tuner.
Command:
&DT,dd,BAND,FM<cr>
dd = ST, R1, R2
Function:
Switch to FM band on desired tuner.
This will also switch to the last FM station played on this tuner.
Query:
&DT,dd,BAND,?<cr>
dd = ST, R1, R2
Function:
Query the currently selected band of the desired tuner.
This response will also be sent as unsolicited feedback.
Response:
*DT,R1,BAND,AM<cr>
or
*DT,R1,BAND,FM<cr>