Filter
Top Products
XDVDN8190 OPERATION
26
SCREEN Setup - Touch Screen Calibration
Upon initial installation or
occasionally, the touch screen may
have to be calibrated. Follow these
steps as described.
Step 1
Step 2
Step 3 & 4
Step 5 & 6
1) Touch top left corner of screen.
2) Touch SCREEN icon.
3) Touch No in TS Calibration row.
4) Then touch Yes.
5) Touch and hold the pointers as indicated on the screen for 2 seconds each.
6) Screen will automatically return to MAIN MENU, touch RETURN to exit.
L
L
L
L
3
4
1
2
Notes: For proper calibration
you must touch each pointer for
2 seconds. If pointers are not
touched properly, the calibration
sequence will start over until the
calibration is done correctly.
L
5