Filter
Top Products
51
3
t
When “BASS ENHANCER” is selected: (For 2 channel source.)
OFF (Factory default)
No sound is produced from the subwoofer.
ON
Sound is produced from the subwoofer.
In the case, set the subwoofer to “YES” at the speaker settings.
This works only with analog audio output.
This does not work, at “SOURCE DIRECT” is on.
y
When “COMPRESSION” is selected:
OFF (Factory default)
Select this for the standard range.
ON
Select this to achieve powerful sound even when the volume is low.
This setting is suited for watching DVDs late at night with the volume
low. (This setting is only valid for DVDs recorded in Dolby Digital.)
u
When “SACD (Super Audio CD) FILTER” is selected:
50kHz (Factory default)
When playing Super Audio CDs, high frequencies of 50kHz and
higher are cut.
100kHz
When playing Super Audio CDs, high frequencies of 100kHz and
higher are cut.
Set to 100kHz when a high frequency compatible AV amplifier is
connected.
AUD IO SETUP
AUDIO CHANNEL
DIGITAL OUTPUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
SACD FILTER
SOURCE D IRECT
EXIT SETUP
COMPRESSION
DECISION:ENTER BUTTONSELECT:
ON
OFF
AUD IO SETUP
AUDIO CHANNEL
DIGITAL OUTPUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
SACD FILTER
SOURCE D IRECT
EXIT SETUP
COMPRESSION
DECISION:ENTER BUTTONSELECT:
100kHz
50kHz
✽
To exit the setup mode
Use the
ª
cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP
button on the remote control unit.
Remote control unit Remote control unit
AUD IO SETUP
AUDIO CHANNEL
DIGITAL OUTPUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
SACD FILTER
SOURCE D IRECT
EXIT SETUP
COMPRESSION
DECISION:ENTER BUTTONSELECT:
OFF
ON