Filter
Top Products
41
3
•When “DEFAULT” is selected:
When “DEFAULT” is selected and the ENTER button is
pressed, all the items are restored to their factory default
settings.
When digital connections are made with an AV amplifier, make
the speaker settings on the AV amplifier.
For DVD audio discs, the disc’s settings are given priority, so the
sound may not be produced as set with the above speaker mode
setting.
✽
Press the RETURN button to return to the “HDMI SPEAKER
SETUP” menu.
When the HDMI connection cable is disconnected, the “SPEAKER
CONFIGURATION”, “CHANNEL LEVEL”, and “DELAY TIME”
settings under “HDMI SPEAKER SETUP” are stored.
e
When “HDMI AUTO FORMAT” is selected:
PANEL RES. (Factory default)
The HDMI output format is selected automatically according to the
panel resolution of the connected HDMI device.
MAX RES.
The HDMI output format is selected automatically according to the
maximum resolution of the connected HDMI device.
When connected with a DVI device, the HDMI output format is fixed
at 480P/576P.
r
When “DENON LINK” is selected:
OFF (Factory default)
No digital audio signals are output from the DENON LINK connector.
Set to “OFF” when not using DENON LINK connections.
2nd (AUTO)
Signals are output from the DENON LINK connector in “2nd” format.
When playing the multi/stereo area of super audio CDs, the
connection to the IEEE1394 connector is detected automatically, and
if a device is connected, the signals are output from the IEEE1394
connector. If no device is connected to the IEEE1394 connector, the
signals are output from the analog audio connectors.
2nd (1394)
Signals are output from the DENON LINK connector in “2nd” format.
When playing the multi/stereo area of super audio CDs, the signals
are output from the IEEE1394 connector. No signals are output from
the analog audio connectors.
2nd (ANALOG)
Signals are output from the DENON LINK connector in “2nd” format.
When playing super audio CDs, the signals are output from the
analog audio connectors. (No signals are output from the IEEE1394
connector, even if a device is connected.) Select this if your AV
amplifier does not have an IEEE1394 connector.
3rd
Set this when the amplifier to be connected by DENON LINK 3rd.
When playing super audio CDs, the signals are output from the
DENON LINK.
Set this according to the type of DENON LINK connector on the
amplifier connected to the DVD-A1XV. (See page 18.)
When the DENON LINK 2nd connection, Super audio CD’s signals
are not output from the DENON LINK connector. Please use the
analog output terminals or the IEEE1394 connection.
When the DENON LINK is set, the down mixed audio signals are
output only from the Left and Right and Front Left and Front Right
terminals.
DECISION:ENTER BUTTONSELECT:
DIGITAL INTERFACE SETUP
HDMI/DVI PIC TURE ADJUST
HDMI AUDIO SETUP
DENON LINK
EXIT SETUP
OFF
2nd(AUTO)
2nd(1394)
2nd(ANALOG)
3rd
HDMI AUTO FORMAT
DENON LINK
IEEE1394
DECISION:ENTER BUTTONSELECT:
DIGITAL INTERFACE SETUP
HDMI/DVI PIC TURE ADJUST
HDMI AUDIO SETUP
EXIT SETUP
PANEL RES.
MAX RES.
HDMI AUTO FORMAT
DENON LINK
IEEE1394
Remote control unit Remote control unit
HDMI SPEAKER SETUP
DELAY TIME
DECISION:ENTER BUTTONSELECT:
DISTANCE
FRONT LCH
CENTER
FRONT RCH
SURROUND RCH
SURROUND L CH
SUB
W
OOFER
DEFAULT
ON
METERS
3.6 m
3.6 m
3.6 m
3.6 m
3.0 m
3.0 m