Filter
Top Products
48
B
When “SPEAKER CONFIGURATION” is selected, use the
•
and
ª
cursor buttons to select the speaker to be set then press the
ENTER button.
• The type of speaker used for the front speakers, center speaker,
subwoofer and surround speakers can be set. Use the • and ª
cursor buttons to select the speaker type, then press the
ENTER button.
LARGE
Select this when a large speaker is connected.
SMALL
Select this when a small speaker is connected.
NONE
Select this when no speaker is connected.
YES
Select this when a subwoofer is connected.
NO
Select this when no subwoofer is connected.
• When “CROSSOVER” is selected:
40 Hz, 60 Hz, 80 Hz (Factory default), 100 Hz, 120 Hz, set the
frequency of crossover.
✽
Press the RETURN button to return to the “SPEAKER SETUP”
menu.
B
When “CHANNEL LEVEL” is selected, use the
•
and
ª
cursor
buttons to select the speaker to be adjusted, then use the
0
and
1
cursor buttons to set the level.
• TEST TONE
Use the
0
and
1
cursor buttons to select auto or manual.
Adjust so that the volume of the test tones output from the
different speakers sounds the same.
• The volume level output from the front speakers (left and right
channels), center speaker, surround speakers (left and right
channels) and subwoofer can be adjusted.
• The volume level can be adjusted between 0 and –10 dB in
steps of 1 dB.
• Settings SW +10 dB to “ON” increases by 10 dB the volume
level that is output from the subwoofer.
✽
Press the RETURN button to return to the “SPEAKER SETUP”
menu.
SPEAKER SETUP
CHANNEL LEVEL
DECISION:ENTER BUTTONSELECT:
TEST TONE
FRONT LCH
CENTER
FRONT RCH
SURROUND RCH
SURROUND L CH
SUB
W
OOFER
S
W + 1 0
d
B
OFF
0dB
0dB
0dB
0dB
0dB
0dB
OFF
Remote control unit
3
SPEAKER SETUP
SPEAKER CONFIGURAT ION
FRONT SP
CENTER SP
SUB
W
OOFER
SURROUND SP
CROSSOVER
LARGE
LARGE
YES
LARGE
80Hz
DECISION:ENTER BUTTONSELECT:
Remote control unit Remote control unit