Filter
Top Products
44
3
w
When “TV TYPE” is selected:
NTSC
Select this when your TV’s video format is NTSC.
If NTSC is selected, output format is fixed to NTSC.
PAL
Select this when your TV’s video format is PAL.
If PAL is selected, output format is fixed to PAL.
MULTI (Factory default)
Select this when your TV is compatible with both the NTSC and PAL
formats.
NTSC signals are output from the video output jacks when discs
recorded in NTSC format are played, and PAL signals are output from
the video output jacks when discs recorded in PAL format are played.
NOTE:
• If “TV TYPE” is set to a format other than a registered TV format, the
image may no longer be smooth and the top and bottom of the image
may be cut off.
e
When “TV SYSTEM” is selected:
PROGRESSIVE (Factory default)
The audio signals are synchronized with the progressive output.
(For component video output signals when “COMPONENT VIDEO
OUT” at “VIDEO SETUP” is set to “PROGRESSIVE”)
INTERLACED
The audio signals are synchronized with the interlaced output.
(For video output and S-video output signals, as well as for
component video output signals when “COMPONENT VIDEO OUT”
at “VIDEO SETUP” is set to “INTERLACED”)
HDMI/DVI
The audio signals are synchronized with the video signals output via
the HDMI/DVI connectors.
OTHERS
Select this when you want to view both the interlace
output/progressive output image and the HDMI/DVI output image at
the same time.
The audio signals are set to the optimum timing for the interlace
output/progressive output image and the HDMI/DVI output image.
(Note, however, that the audio signals are not synchronized with the
interlace output/progressive output image and the HDMI/DVI output
image. To synchronize them, set to another position.)
r
When “COMPONENT VIDEO OUT” is selected: (NOTE)
PROGRESSIVE (Factory default)
The signals output from the DVD-A1XV’s “COMPONENT VIDEO
OUT” connector are formatted in the progressive format.
Select this when using the DVD-A1XV connected to a progressive
type TV.
INTERLACED
The signals output from the DVD-A1XV’s “COMPONENT VIDEO
OUT” connector are formatted in the interlaced format.
Select this when using the DVD-A1XV connected to an interlace type
TV.
NOTE:
• For the component output only, it is possible to switch between
interlace image output and progressive image output. It is not
possible to specify progressive image output for the Video output
connector or S-Video output connector.
Remote control unit Remote control unit
SQUEEZE MODE
TV SYSTEM
VIDEO SETUP
TV ASPECT
TV TYPE
COMPONENT V I DEO OUT
NTSC
PAL
M
ULT I
PROGRESSI VE MODE
AV1 V IDEO MODE
EXIT SETUP
DECISION:ENTER BUTTONSELECT:
SQUEEZE MODE
VIDEO SETUP
TV ASPECT
TV TYPE
TV SYSTEM
COMPONENT V I DEO OUT
PROGRESSIVE
INTERLACED
PROGRESSI VE MODE
AV1 V IDEO MODE
EXIT SETUP
DECISION:ENTER BUTTONSELECT:
SQUEEZE MODE
VIDEO SETUP
TV ASPECT
TV TYPE
TV SYSTEM
COMPONENT V I DEO OUT
PROGRESSIVE
INTERLACED
HDMI/DVI
OTHERS
PROGRESSI VE MODE
AV1 V IDEO MODE
EXIT SETUP
DECISION:ENTER BUTTONSELECT: