Filter
Top Products
23
5
PART NAMES AND FUNCTIONS
(1) Front Panel
q
Power ON/STANDBY button
•Press once to set to the standby mode. The indicator
lights up in red.
•Press again to turn the power on. The indicator lights up in
green.
w
Power indicator
• This indicator lights when the power is on and when the
power is in the standby mode.
Light green: Power is on
Light red : Power is in the standby mode
e
Power switch
•Press once to turn the power on.
•Press again to set to the “OFF” position and turn the
power off.
r
Display
• Information on the disc that is currently playing is shown
on the display. (See page 26.)
t
Remote control sensor
y
SELECT of HDMI/DVI button
•Press this to set the video signal output via the HDMI/DVI
connector. (See page 63.)
u
FORMAT of HDMI/DVI button
•Press this to set the video signal format via the HDMI
connector or the DVI connector. (See page 63.)
480P/576P 720P 1080i AUTO
HDMI Y Cb Cr HDMI RGB
HDMI/DVI OFF
i
VIDEO MODE button
• Use this to instantly change the adjustment mode of the
stored video signals. (See page 63.)
The setting values of PICTURE MODE and SQUEEZE
MODE will not be stored.
The unit will return to the stored setting values when the
power is switched off.
• PICTURE MODE
• TV SYSTEM
• SQUEEZE MODE
No effective for interlaced image.
• AUDIO ADJUST
o
Select the playback area/layer of SUPER AUDIO
CD (SUPER AUDIO CD SETUP)
• Switch the area /layer of the Super audio CDs played with
priory.
• MULTI.......When playing Super audio CDs, the Multi
channel area is played with priory
• STEREO....When playing Super audio CDs, the stereo
channel area is played with priority.
•CD.............When playing Super audio CDs, the CDs layer
is played with priority.
MULTI STEREO CD
TIME:0msecTIME:–30msec TIME:+200msec
OFF ON AUTO
INTERLACEDPROGRESSIVE
HDMI/DVIOTHERS
STD M1 M2 M3 M4 M5
PLAY STOP
OPEN/CLOSE
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A1XV
STILL / PAUSE
PURE
DIRECT
SELECT
VIDEO MODE
PUSH ENTER
FORMATSELECT
HDMI / DVI SUPER
AUDIO CD
SET UP
ON / STANDBY
qw e r t
uo
yi