Filter
Top Products
39
3
w
When “HDMI AUDIO SETUP” is selected:
2CH (Factory default)
The audio signals are output via the HDMI connector with a down-
mixed to 2 channel.
MULTI (NORMAL)
The multi-channel audio signals are output via the HDMI connector
with a bitstream.
MULTI (LPCM)
The multi-channel audio signals are output via the HDMI connector
with a linear PCM.
B
When “MULTI (LPCM)” is selected, use the
•
and
ª
cursor
buttons to select the item to be set, then press the ENTER button.
SPEAKER CONFIGURATION
Use this to select the types of the different speakers.
CHANNEL LEVEL
Use this to adjust the output level of the different speakers.
DELAY TIME
Use this to set the distance from the different speakers to the
listening position.
✽
To exit the HDMI SPEAKER SETUP mode.
Use the
ª
cursor button to select “DIGITAL INTERFACE SETUP”
then press ENTER button.
B
When “SPEAKER CONFIGURATION” is selected, use the
•
and
ª
cursor buttons to select the speaker to be set then press the
ENTER button.
• The type of speaker used for the front speakers, center speaker,
subwoofer and surround speakers can be set. Use the • and ª
cursor buttons to select the speaker type, then press the
ENTER button.
LARGE
Select this when a large speaker is connected.
SMALL
Select this when a small speaker is connected.
• When “CROSSOVER” is selected:
40 Hz, 60 Hz, 80 Hz (Factory default), 100 Hz, 120 Hz, set the
frequency of cross over.
✽
Press the RETURN button to return to the “HDMI SPEAKER
SETUP” menu.
HDMI SPEAKER SETUP
SPEAKER CONFIGURAT ION
CHANNEL LEVEL
DELAY TI
M
E
DIGITAL INTERFACE SETUP
DECISION:ENTER BUTTONSELECT:
HDMI SPEAKER SETUP
SPEAKER CONFIGURAT ION
FRONT SP
CENTER SP
SUB
W
OOFER
SURROUND SP
CROSSOVER
LARGE
LARGE
YES
LARGE
80Hz
DECISION:ENTER BUTTONSELECT:
The display depends on the connected device.
(Indicates whether or not speakers are
connected)
Remote control unit Remote control unit
DECISION:ENTER BUTTONSELECT:
DIGITAL INTERFACE SETUP
HDMI/DVI PIC TURE ADJUST
2CH
MULTI(NORMAL)
MULTI(LPCM)
HDMI AUDIO SETUP
HDMI AUTO FORMAT
EXIT SETUP
DENON LINK
IEEE1394