Filter
Top Products
38
When “DIGITAL INTERFACE SETUP” is selected
1
2
See pages 31, 32.
Use the
•
and
ª
cursor buttons to select the desired setting, then press
the ENTER button.
HDMI/DVI PICTURE ADJUST
Switches the digital RGB video range (data range) via the HDMI and the
DVI-D connectors.
HDMI AUDIO SETUP
Use this to adjust for the audio signals via the HDMI connector.
HDMI AUTO FORMAT
Set the “AUTO” function selected with the HDMI/DVI FORMAT button
on the main unit or the remote control unit.
DENON LINK
Use this to output digital signals from the DENON LINK terminal.
IEEE1394
Use this to output digital signals from the IEEE1394 terminal.
PANEL RES .
NORMAL
2CH
DIGITAL INTERFACE SETUP
HDMI/DVI PIC TURE ADJUST
HDMI AUDIO SETUP
HDMI AUTO FORMAT
EXIT SETUP
OFF
OFF
DENON L INK
IEEE1394
DECISION:ENTER BUTTONSELECT:
3
Use the
•
and
ª
cursor buttons to select the desired setting, then press
the ENTER button.
q
When “HDMI/DVI PICTURE ADJUST” is selected:
NORMAL (Factory default)
Signals are output via the HDMI and the DVI-D connectors with a
digital RGB video range (data range) of 16 (black) to 235 (white).
ENHANCED
Signals are output via the HDMI and the DVI-D connectors with a
digital RGB video range (data range) of 0 (black) to 255 (white).
When the HDMI and the DVI-D connectors are connected , the black
may seem to stand out, depending on the TV or the Monitor. In this
case, set this to “ENHANCED”.
When select “HDMI Y Cb Cr” under “HDMI/DVI SELECT”, will have
no effect. (See page 63.)
DECISION:ENTER BUTTONSELECT:
DIGITAL INTERFACE SETUP
HDMI/DVI PIC TURE ADJUST
NORMAL
ENHANCED
HDMI AUDIO SETUP
HDMI AUTO FORMAT
EXIT SETUP
DENON LINK
IEEE1394
Remote control unit Remote control unit
Remote control unit Remote control unit