Filter
Top Products
20
ENGLISH
ENGLISH
FLANGER OFF
i When the FLANGER button is
pressed, the flanger parameter
selection mode is set. If the
FLANGER button is pressed
again, the flanger function is turned off.
2-3
FILTER OFF
!2 When the FILTER button is
pressed, the filter parameter
selection mode is set. If the
FILTER button is pressed again,
the filter function is turned off.
FILTER ON
o When the FILTER button is
pressed, the filter function is
turned on and the parameter
selection mode is set.
*When filter indicator is solid (not blinking),
press the FILTER button to set the filter
parameter selection mode again.
Select the parameters
!0 In the parameter selection
mode, the “FILTER” and
“PARAMETERS” indicator
flashes and the filter
parameters can be selected
with PARAMETERS knob and EFFECTS Knob.
Filter Band width: EFFECTS Knob
Filter types: PARAMETERS knob
Parameter selection mode OFF
!1 When the PARAMETERS
knob is pushed, parameter
selection mode is canceled.
Parameter selection mode OFF
u When the PARAMETERS
knob is pushed, parameter
selection mode is canceled.
Set the parameters
y In the parameter selection
mode, the “FLANGER” and
“PARAMETERS” indicator
flashes and the flanger
parameters can be selected
with PARAMETERS knob and EFFECTS Knob.
FLANGER Depth: EFFECTS Knob
FLANGER Delay time: PARAMETERS knob
FLANGER ON
t When the FLANGER button is
pressed, the flanger function is
turned on and the parameter
selection mode is set.
*When the flanger indicator is solid (not
blinking), press the FLANGER button to set
the flanger parameter selection mode again.
ECHO/LOOP OFF
r When the ECHO/LOOP button
is pressed, the echo/loop
parameter selection mode is
set. If the ECHO/LOOP button
is pressed again, the echo/loop
function is turned off.
2-1
2-2
FLANGER
3-1
3-2
FILTER
3-3
1-5
2
-4
3-4
• Echo playback is only performed when the currently
playing track is paused by the PLAY/PAUSE (
13)
button.
Performing the tail echo operation
When the tail echo mode is on, press the
PLAY/PAUSE (
13) button during playback to
perform the tail echo operation.
When the PLAY/PAUSE (
13) button is pressed
again during the tail echo operation, the tail echo
operation is canceled and normal playback
resumes.
Turning the tail echo mode on
!3 Press and hold in the
ECHO/LOOP button for 2
seconds. The tail echo mode is
turned on and the parameter
selection mode is set.
✽ If the tail echo mode is already on, the
parameter selection mode is set when the
ECHO/LOOP button is pressed.
Setting the parameters
!4 When in the parameter
selection mode, the
ECHO/LOOP LED flashes
and the echo/loop
parameters can be set
using the PARAMETER and
EFFECTS knobs.
Echo Feedback level:
EFFECTS knob
Echo Delay time: PARAMETERS knob
4-1
4-2
Tail Echo
4-3
Turning the parameter
selection mode off
!5 Press either the
PARAMETER knob or the
EFFECTS knob to cancel
the parameter selection
mode.
4-4
Turning the tail echo mode off
!6 When the ECHO/LOOP button
is pressed, the tail echo
parameter selection mode is
set. The tail echo mode turns
off when the ECHO/LOOP
button is pressed again at this time.
The tail echo mode can also be turned off by
pressing the ECHO/LOOP button and holding it
in for 2 seconds while the tail echo mode is on.
4-5
Parameter selection mode OFF
e When the PARAMETERS
knob is pushed, parameter
selection mode is canceled.
1-4