Filter
Top Products
16
ENGLISH
ENGLISH
Next File playback start
t When the PLAY/PAUSE
(
13) button is pushed, the
current playback is stopped
and playback of the next file
starts.
✽The currently playing file can be faded out
when starting to play a different file. The fade
out time can be selected at ¤0 PRESET “(4)
Next File CFade”.
• If the PLAY/PAUSE (
13) button is not
pushed after standing by at the next file,
when in the CONT. playback mode, playback
of the next file starts once all of the currently
playing playback data has been played.
The same goes for SINGLE playback mode.
8
NEXT FILE
• It’s now possible to select the next file to be played while continuing playback of the current file without interrupting
playback.
*Crossfade can also be used for a smooth transition.
3
File search start
r When the PARAMETERS
knob or PLATTER disc or
the CUE button is pushed
after selecting the file,
current playback continues
as the next file is searched
for and the standby mode is
set. When the standby
mode is set, the CUE
button lights up and the
PLAY/PAUSE (
13) button
flashes.
• The time display indicates
the remaining playback
time for data in the memory after CUE is
pressed.
NOTE:
The amount of time for which playback of the
currently continuing file can be continued is a
maximum of 10 seconds from the time
searching for the next file starts.
DECK1:ORANGE
DECK2:GREEN
NEXT FILE
B
LOCK
AUTO/INPUT BPM
FAST SEARTCH
MEMO
PRESET
DECK1/2
HOT LIST
ADD
OMIT
MIRROR
q
e
r
r,t
w,
r
w
1
Enter Next File mode
q When the NEXT FILE
button is pushed during
playback, the NEXT FILE function is turned on.
• When this mode is set, CUE button blink.
• When the button is pushed again, the NEXT
FILE mode is turned off.
• Only files stored on the same device can be
selected with the NEXT FILE function.
2-1
Select the file
w Turn the PARAMETERS
knob or SCRATCH disc and
select for the next file to be
played.
4
2-2
Select the MEMO
e The CUE point of MEMO can be selected as
NEXT FILE.
• When the NEXT FILE with which MEMO is
memorized is selected, “MEMO“ is
displayed on the navigation display.
• If the MEMO button is pushed at this time,
the CUE point is memorized as the NEXT
FILE & point to be selected.
• The MEMO will be canceled if another file is
selected by PARAMETERS knob or the
MEMO button is pushed again.
NEXT FILE