Filter
Top Products
9
ENGLISH
ENGLISH
5
TURNING ON THE POWER
q Press the power button.
The display below appears.
• Operation of the device set in the presettings starts.
• If Power On Play is turned on, the playlist selected at “Power On Play” in the presettings is launched.
w If the device selected above is not connected, select the device using the procedure shown below.
•Press the DEVICE button.
The device selection screen appears.
Turn the PARAMETERS knob or scratch disc to select the device.
Press the PARAMETERS knob to set the selected device.
@7 @6
@5
Full display mode
@5
Text display
• The file name, artist name and album name for the
file at which the cursor is set are displayed here.
• The title name is displayed in the text display
section when the cursor is set to a file name, and
the file name is displayed when the cursor is set to
a title name.
@6
D-SYNC mode indicator
• This is displayed when in the D-SYNC mode.
The D-SYNC indicator will only come on when two
DN-HS5500 are connected together by a RJ45
cable.
@7
Playing deck indicators
• These indicate the deck for which the panel
buttons will operate.