Denon DHT-M330DV Home Theater System User Manual


 
13
ENGLISH
ACTIVE SUBWOOFER
(5) Using the active subwoofer
Use Subwoofer jack to connect in case you had additional active subwoofer.
•You can connect a larger active subwoofer to the system. Connect the active subwoofer to the SW (Subwoofer) PRE-OUT jack using a shielded
audio cable.
(6) Using SURROUND BACK PRE OUT (SBL/SBR)
Use SURR. BACK PRE OUT jack to connect additional POWER AMPLIFIER and speaker systems.
You can enjoy 6.1CH or 7.1CH surround system.
When making connections, also refer to the operating instructions of the other components.
To make the 6.1 or 7.1-channel setting, set the speakers to “6.1CH” or “7.1CH” in the quick setup and select “Room Setup” . (See pages 27 .)
POWER AMPLIFIER
(for SURR. BACK ch)
Connect the power amplifier for SURR.
BACK speaker system.
IN
SURR. BACK (L) Speaker
SURR. BACK (R) Speaker
IN
AV SURROUND RECEIVER
(AVR-M330)
AV SURROUND RECEIVER
(AVR-M330)