Filter
Top Products
43
Setting the Advanced Playback
1
Select “Advanced Play back” at the System Setup
Menu.
2
Display the Advanced Playback Menu screen.
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
Advanced Play
*System Setup
CH SEL
ENTER
CH SEL
ENTER
(Main unit)
(Remote control unit)
4-1 Setting the Audio Delay
This function allows you to adjust the time delay of the video and audio signals and store these settings for the different input sources.
The setting is made while watching a DVD or other software, so it is not made here.
By default, this is not displayed when no digital signals are being input.
For instructions on making the setting, refer to page 63.
NOTE:
The audio delay setting does not apply when it plays in the EXT. IN mode or in the analog input direct mode or stereo mode (TONE DEFEAT “ON”).
4
4-2 Setting the Dolby Digital Setup
Sets the down-mixing method when not using a center speaker or surround speakers.
OFF: The dynamic range is not compressed.
ON: The dynamic range is compressed automatically according to the combination of speakers being used.
1
Select “Dolby Digital Setup” at the Advanced
Playback Menu.
3
Select “ON” if you want to use the Compression,
“OFF” if you do not want to use it.
4
Enter the setting.
The Advanced Playback Menu reappears.
NOTE:
When a center speaker or surround speakers, are not used the sound is played from the front speakers.
Set “Compression” to “ON” if it seems that sound is distorted because the input level exceeds the allowable input for the front speakers.
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
CH SEL
ENTER
CH SEL
ENTER
(Main unit)
(Remote control unit)
Dolby D Setup
*Advanced Play
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
Comp. : OFF
*Dolby D Setup
CH SEL
ENTER
CH SEL
ENTER
(Main unit)
(Remote control unit)
2
Press the ENTER button.
Display the Dolby Digital Setup screen.