Filter
Top Products
42
4
Enter the setting.
The System Setup Menu reappears.
NOTE:
Down-converting from the component video signal to the S-Video and composite video signal is not possible, so when not using the
component video monitor output terminal connect the player using the S-Video or composite video input terminal.
Cautions on the video conversion function:
When the component video terminals are used to connect the AVR-3805 with a TV (or monitor, projector, etc.) and the video (yellow) or
S video terminals are used to connect the AVR-3805 with a VTR, depending on the combination of the TV and VTR the picture may flicker
in the horizontal direction, be distorted, be out of sync or not display at all when playing video tapes.
If this happens, connect a commercially available video stabilizer, etc., with a TBC (time base corrector) function between the AVR-3805
and the VTR, or if your VTR has a TBC function, turn it on.
CH SEL
ENTER
CH SEL
ENTER
(Main unit)
(Remote control unit)
3-5
Auto Tuner Presets
Use this to automatically search for FM broadcasts and store up to 56 stations at preset channels A1 to 8, B1 to 8, C1 to 8, D1 to 8, E1 to 8, F1
to 8 and G1 to 8.
NOTE:
• If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station, then preset it
using the manual “Preset memory” operation.
1
Select “Auto Tuner Presets”at the Input Setup Menu.
2
Display the Auto Preset Memory screen.
3
Press the CURSOR left button to select “Yes”.
“Search” flashes on the screen and searching begins.
“Completed” appears once searching is completed.
The display automatically switches to screen.
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
Auto Tuner
*Input Setup
CH SEL
ENTER
CH SEL
ENTER
(Main unit)
(Remote control unit)
Start :Yes
*Auto Tuner
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
4
Enter the setting.
The Input Setup Menu reappears.
CH SEL
ENTER
CH SEL
ENTER
(Main unit)
(Remote control unit)