Filter
Top Products
74
Convenient functions
REC OUT mode
When using the audio/video recording connectors (DVR outputs), you
can record the audio or video from a different program source while
listening to the currently played track.
1
Press ZONE2 / REC SELECT
until “RECOUT SOURCE” is
displayed.
The indicator illuminates.
ZONE2 SOURCE ZONE2 TUNER ZONE2 NET/USB
····
RECOUT NET/USB RECOUT DOCK RECOUT SOURCE
····
2
Press ZONE2 / REC SELECT to choose the input
source to be recorded.
•For operating instructions, refer to the respective device’s
operating instructions.
3
Start recording.
•For operating instructions, refer to the respective device’s
operating instructions.
•To cancel, press ZONE2 / REC SELECT until “ZONE2 SOURCE” is
displayed.
•Make a test recording before starting the actual recording.
•Signals are only output to the analog REC OUT connectors when
the digital signals input to the digital input connectors (OPTICAL/
COAXIAL) are PCM (2-channel) signals.
•Sources selected with the REC OUT mode are output from ZONE2
as well.
•The operable buttons on the remote control unit in REC OUT mode
while it is in the operating mode for ZONE2 are as follows:
•ZONE/DEVICE power button
•Muting button
•Master volume control button
NOTE
•Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
•Input sources for which “Delete” is selected at “Source Delete”
(vpage115) cannot be selected.
Basic version
Advanced version
Information
Advanced version
BD