Filter
Top Products
61
Connect
•For the method of connecting 7.1-channel system with surround back speakers, see
C page 6 “Connecting the speakers”.
•For the method of connecting the TV, see C page 3 “Connect this unit to the
television using an HDMI cable (sold separately)”.
7.1-channel (Surround back / Front height / Front wide speaker)
connection
The illustration on the right shows a connection example for performing 7.1-channel
playback using the surround back, front height or front wide speakers.
If you connect the surround back, front height and front wide speakers before you
start playback, the audio is played back by automatically switching the speakers in
accordance with the surround mode or input signals.
To perform 7.1-channel playback using the surround back, front height or front wide
speakers, set “Amp Assign” to “NORMAL” in steps 3 and 4 for “Set up “Amp
Assign”” (vpage67).
NOTE
•For speaker cable connections, see C page 6 “Connecting the speakers”.
•Connect so that the speaker cable core wires do not protrude from the speaker
terminal. The protection circuit may be activated if the core wires touch the
rear panel or if the + and – sides touch each other (vpage143 “Protection
Circuit”).
•Never touch the speaker terminals while the power supply is connected.
Doing so could result in electric shock (When the Setup wizard is running,
follow the instructions in the Setup wizard screen for making connections.).
•Use speakers with the speaker impedances shown below.
Speaker terminals Speaker impedance
FRONT
6 – 16 Ω
CENTER
SURROUND
SURR. BACK / AMP ASSIGN
F.HEIGHT
F.WIDE
FL FR
C
SBL SBR
SL
SR
SW
FWR
FWL
FHRFHL
Basic version
Advanced version
Information
Advanced version