Filter
Top Products
136
Surround
n Types of input signals, and corresponding surround modes
This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode.
Symbols in the table
F This indicates the default surround mode.
D This indicates the surround mode that is fixed when “AFDM” (vpage98) is set to “ON”.
S This indicates the selectable surround mode.
Surround mode (vpage53)
NOTE
Input signal types and formats
ANALOG
PCM DTS-HD DTS DOLBY DOLBY DIGITAL
PCM
(multi ch)
PCM
(2ch)
DTS-HD
Master Audio
DTS-HD High
Resolution
Audio
DTS
EXPRESS
DTS ES
DSCRT
(With Flag)
DTS ES
MTRX
(With Flag)
DTS
(5.1ch)
DTS 96/24
DOLBY
TrueHD
DOLBY
DIGITAL Plus
DOLBY
DIGITAL EX
(With Flag)
DOLBY
DIGITAL EX
(With no
Flag)
DOLBY
DIGITAL
(5.1/5/4/3ch)
DOLBY
DIGITAL (2ch)
DTS SURROUND
DTS-HD MSTR
z1 F
DTS-HD HI RES
z1 F
DTS ES DSCRT6.1
z2z3 F
DTS ES MTRX6.1
z2z3 F D
DTS SURROUND
z1 S S F
DTS 96/24
z1 F
DTS (–HD) + PLgx CINEMA z2z4 S S S S S S
DTS (–HD) + PLgx MUSIC z2z3 S S S S S S
DTS (–HD) + PLgz z2z5 S S S S S S S
DTS EXPRESS
z1 F
DTS (–HD) + NEO:6
z2z3 S S S S S S
DTS NEO:6 CINEMA
z1 S S S
DTS NEO:6 MUSIC
z1 S S S
DTS NEO:6 CINEMA A-DSX
S S S
DTS NEO:6 MUSIC A-DSX
S S S
Audyssey DSX™
S S S S S S S
z1 The same was when “Audyssey DSX™” (vpage101) setting is set to “ON”.
z2 This surround mode can be selected when “Amp Assign” (vpage104) is set to “NORMAL”.
z3 If “Speaker Config.” – “Surr.Back” (vpage105) is set to “None”, this surround mode cannot be selected.
z4 If “Speaker Config.” – “Surr.Back” (vpage105) is set to “1spkr” or “None”, this surround mode cannot be selected.
z5 If “Speaker Config.” – “Front Height” (vpage105) is set to “None”, this surround mode cannot be selected.
Basic version
Advanced version
InformationInformation