Filter
Top Products
128
Display
uioQ5
Q7
Q9 Q0Q1Q3Q4
Q2
Q6
Q8
wq e r t
y
q Input signal indicators
w Input signal channel indicators
These light when digital signals are input.
When playing HD Audio sources, the indicator lights when a
signal from an extension channel (a channel other than the front,
center, surround, surround back or LFE channel) is input.
If there are two or more extension channels, the and
indicators light.
e Information display
The input source name, surround mode, setting values and other
information are displayed here.
r Output signal channel indicators
Lights when audio signals are being output from the speakers.
t Front speaker indicator
This lights according to the setting of the front A and B speakers.
y Monitor output indicator
These light according to the HDMI monitor output setting.
When set to “Auto (Dual)”, the indicators light according to
connection status.
u Master volume indicator
i MUTE indicator
This lights when the mute mode is selected (vpage29).
o PARTY indicators
These light during party mode (vpage 76 “Party mode
function”).
•ORGANIZER
This lights to indicate that party mode has started as Organizer.
•ATTENDEE
This lights to indicate that party mode has started as Attendee.
Q0 Audyssey
®
indicators
Lights up as follows, depending on the setting of “MultEQ
®
XT”,
(vpage 100), “Dynamic EQ
®
” (vpage 100) and “Dynamic
Volume
®
” (vpage100).
When “MultEQ
®
XT”, “Dynamic EQ
®
” and
“Dynamic Volume
®
” are “ON”.
When “MultEQ
®
XT” and “Dynamic EQ
®
” are
“ON” and “Dynamic Volume
®
” is “OFF”.
When “MultEQ
®
XT” is “ON” and “Dynamic EQ
®
”
and “Dynamic Volume
®
” are “OFF”.
Q1 Sleep timer indicator
This lights when the sleep mode is selected (vpage71, 83).
Q2 RESTORER indicator
This lights when the RESTORER mode is selected (vpage102).
Q3 Multi-zone indicators
This lights up when ZONE2, ZONE3 (separate room) power is
turned on (vpage82).
Q4 AL24 indicator
This lights when AL24 Processing Plus (vpage141) is activated.
Q5 Input mode indicators
Set the audio input modes for the different input sources
(vpage93).
Q6 HDMI indicator
This lights when playing using HDMI connections.
Q7 Tuner reception mode indicators
These light according to the reception conditions when the input
source is set to “TUNER”.
STEREO : In the FM mode, this lights up when receiving stereo
broadcasts.
TUNED : Lights up when the broadcast is properly tuned in.
AUTO : Lights up when in the auto tuning mode.
RDS : Lights up when receiving RDS broadcasts.
Q8 Recording output source indicator
This lights when the REC OUT mode is selected.
Q9 Decoder indicators
These light when the respective decoders are operating.
Basic version
Advanced version
InformationInformation