Filter
Top Products
36
Tuning in radio stations
n Listening to preset stations
1
Press SHIFT to select the memory
block (A to G).
TUNER
CH A
MEMORY
Memory
SEARCH
Search
BandTuning
Preset
CH+/-
FM 97.90MHz
ST.Name HD1
Song Title
Artist Name
Program Type
STEREO
Mode
A8 FM 90.10MHz
A7 FM 90.10MHz
A6 FM 90.10MHz
A5 FM 90.10MHz
A4 FM 108.00MHz
A3 FM 98.10MHz
A2 FM 89.10MHz
A1 FM 87.50MHz
Preset Channel
2
Press CH +, CH – or 1 – 8 to select the desired preset
channel.
You can also operate via the main unit. In this case, perform the
following operations.
Press TUNER PRESET CH + or TUNER PRESET CH – to select a preset
radio station.
n Direct frequency tuning
You can enter the receiving frequency directly to tune in.
1
Press SEARCH.
TUNER
CH A
MEMORY
Memory
SEARCH
Search
Now Playing
BandTuning
Preset
CH+/-
FM ---.--MHz
DIRECT TUNE
AUTO
Input
0-9
2
Input frequencies using the 0 – 9.
•If o is pressed, the immediately preceding input is cancelled.
3
When setting is completed, press ENTER.
The preset frequency is tuned in.
RDS (Radio Data System)
Note that the RDS function only works when receiving RDS compatible
stations.
RDS (works only on the FM band) is a broadcasting service which
allows a station to send additional information along with the regular
radio program signal.
NOTE
The operations described as follows using
SEARCH will not function in areas in which
there are no RDS broadcasts.
n RDS search
Use this function to automatically tune to FM stations that provide
the RDS service.
1
Press TUNER to switch the input
source to “TUNER”.
2
Press SEARCH to select “RDS”.
TUNER
CH A
MEMORY
Memory
SEARCH
Search
Now Playing
BandTuning
Preset
CH+/-
FM 97.90MHz
ST.Name HD1
Song Title
Artist Name
Program Type
AUTO
STEREO
Mode
RDS station
Program category
Traffic info
Radio text
RDS
PTY
TP
RT
RDS
SEARCH CH+/-
Search mode
A1 FM 87.50MHz
Tuning
3
Press CH + or CH –.
The search for RDS stations begins automatically.
•If no RDS stations are found with the above operation, all the
reception bands are searched.
•When a broadcast station is found, that station’s name appears on
the display.
•If no RDS station is found when all the frequencies have been
searched, “NO RDS” is displayed.
If you press CH + or CH – within 5 seconds after the broadcast station
name is shown on the display, you can search for a different station.
Basic version
Advanced version
Information
Basic version
BD