Getting Started Connections Setup Remote Control Multi-Zone Information Troubleshooting Specifications
[Example 4] PDA menu screen
NOTE
You cannot change setup menu operations and zone name on the
PDA menu screen.
[Example 5] Net Audio operating screen
Select to
operate each
zone.
Click the menu from which you want to
make settings.
Click to move up/down the menu
pages.
Click to repeat play.
When registering presets, click “v” to
select the channel you want to register,
and then click “MEMORY”.
Click to stop play.
Click to random play.
Click when selecting menu.
Click “v” to select the preset channel you want
to play.
When searching using an acronym, click “v” and select
from the displayed characters.
NOTE
• To perform web control, you must connect a web control device
such as a PC to the same network as the AVP-A1HDCI.
• With web control, some network settings, etc., cannot be set.
• When updating firmware, settings made by the web controller may
be reset.
SOURCE SELECT INPUT MODE
INPUT MODE
[ AMP]
SOURCE
SELECT
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
Surround mode
Other Operations and
Functions
Other Operations
Playing Super Audio CD
1
Assign “DENON LINK” with the “Digital” setting or
assign “HDMI” with the “HDMI” setting (vpage
48).
2
Either turn <SOURCE SELECT> or press [SOURCE
SELECT] to select the input source assigned in step 1.
The “ ” or “ ” indicator lights on the display.
3
Select “AUTO” for the INPUT MODE (vpage 47).
4
Select the surround mode (vpage 50 ~ 52).
We recommend playing in the DIRECT mode.
5
Start playing the Super Audio CD.
The “ ” indicator lights on the display.
For operating instructions, refer to the respective equipment’s
operating instructions.
• When playing DSD signals in the DIRECT or PURE DIRECT mode,
the DSD signals are converted as such into analog signals. When
playing in other surround modes, the DSD signals are first converted
into PCM format, then into analog signals.
• “DSD DIRECT” is shown on the display when playing DSD 2-channel
signals in the DIRECT mode. “DSD MULTI DIRECT” is shown on
the display when playing DSD multi--channel signals in the DIRECT
mode.
• The DSD signal may not be output depending on the equipment
that is connected.For further details, refer to the user manual for the
equipment being used.
Surround mode
Playback