Professional Surround Sound Tuning Kit Crestron
Setup
Supplied Hardware
The hardware supplied with the Professional Surround Sound Tuning Kit is listed in
the following table.
Supplied Hardware for the Professional Surround Sound Tuning Kit
DESCRIPTION PART NUMBER QUANTITY
APM1 Microphone & CD with Calibration
File
4504520 1
Cable Assembly, XLR to Stereo 3.5 mm, 5” 2017722 1
Cable Assembly, USB 2.0, Series “A” to “B”
Plugs, 6’
2014966 1
Cable Assembly, Female Mini XLR to Male
XLR, 6’
2018284 1
OEM Cable, XLR, 18’ 2017745 3
OEM Boom Stand, Ultra Light 2017744 1
Installation
NOTE: The CD that comes with the Professional Surround Sound Tuning Kit
contains a file specially configured for the individual microphone that also comes
with the kit. Crestron suggests you keep the CD and the microphone together and
also that you make a backup copy of the CD and store it in a safe place.
The Professional Surround Sound Tuning Kit requires that you have at least one of
the following software applications installed on your PC:
• Pro Sound Tools™ (version 1.00.19 or later)
• Crestron Toolbox (version 1.06.10 or later)
Hardware Hookup
While making connections, all components in the system should be powered off.
Place the microphone stand upright. Attach the microphone holder to the stand.
Insert the microphone in a vertical position in the holder.
NOTE: You must place the microphone in a vertical position with the capsule
facing the ceiling for all measurements. Refer to the illustration on the following
page.
2 • Professional Surround Sound Tuning Kit Operations Guide – DOC. 6565A