Filter
Top Products
Professional Surround Sound Tuning Kit Crestron
Insert program material into your source component. Play a track from the disc. Use
the Turn MultEQ On and Turn MultEQ Off buttons to demo the MultEQ
®
XT
filters.
NOTE: If the customer is present during the MultEQ
®
Pro On/Off demo, have them
sit or stand within the room area you measured earlier. If they are not positioned
inside this area, it is less likely they will hear the full effect of the MultEQ
®
XT
filters.
Change the MultEQ
®
XT Filters
There are two options for changing the MultEQ
®
XT filters:
1. Add more measurement positions or redo your measurements. Click the
back arrow until you get back to the Measurement screen (refer to
“Measurement” which starts on page 6).
2. Calculate the MultEQ
®
XT filters with a different target curve. Click the
back arrow to go back to the Target Sound options screen (refer to “Target
Sound Options” on page 10).
View MultEQ
®
Pro On/Off Frequency Response Curves
Click the View Results button to view a graphical display of the frequency response
correction for each channel. For each channel, the graphs on the left are without the
MultEQ
®
Pro correction applied, while the graphs on the right are with the MultEQ
®
Pro correction applied (refer to illustration below).
“Sound Correction Results” Window
NOTE: Before the changes have been permanently saved, the “Sound Correction
Results” window will show the word “DRAFT” in large letters. In the illustration
above, the window is shown as it will appear after the changes have been
permanently saved.
12 • Professional Surround Sound Tuning Kit Operations Guide – DOC. 6565A