Crestron electronic C2N-VEQ4 Speaker System User Manual


 
Cresnet 4-Channel Digital Volume Control Crestron C2N-VEQ4
18 Cresnet 4-Channel Digital Volume Control: C2N-VEQ4 Operations Guide - DOC. 6135A
C2N-VEQ4 General Audio Controls Symbol Input Descriptions
Signal Type Name Value Definition
Digital MuteOut (1 through 4)
plus MuteAll
1/0 High = Mute On
Low = Mute Off
VolOut (1 through 4) 0 to 100%
-80dB to +20dB
0% = Volume set to lowest
100% = Volume set to Highest
TrebOut (1 through 4) 0 to 100%
± 15dB
50%=Flat Treble
0%= -15dB — 100%= +15dB
Analog
BassOut (1 through 4) 0 to 100%
± 15dB
50%=Flat Bass
0%= -15dB — 100%= +15dB
Mixer Controls – Slot 9, SubSlot 2
The 4x4 matrix mixer controls provide the equivalent of a small-scale mixing board.
These controls use a logarithmic scale (0dB to –80dB) with 0dB corresponding to 0
attenuation; anything –80dB and below will mute the signal. The C2N-VEQ4 expects
values ranging from 0d to –800d (and lower), 0.1dB per count, to appear at each
output. (Refer to the signal description table on the next page.) You can direct any
input or combination of inputs to any output, via analog variables in the SIMPL
program.
NOTE: Mixer controls are not accessible in an X-Generation system.
C2N-VEQ4 Mixer Controls Symbol