Creative Sound Blaster Speaker System User Manual


 
Installing Your Audio Card 3
6. Align the gold-striped tabs on the
bottom of the audio card with the
PCI slot, and firmly press the
card into place until it fits snugly.
7. Use the screw from the slot cover
to secure the audio card to the
computer’s frame—securing the
card assures proper grounding.
8. Connect the CD audio cable from
your CD-ROM drive to the audio
card CD_IN connector.
9. Connect speakers,
headphones,
microphone,
joystick, MIDI
devices, or other
devices to the back
panel of the audio
card.
10. Replace the
computer cover.
11. Reconnect the power
cable, monitor, and
other devices.
6
8
7
CD_IN
Connector
Joystick
Microphone
Stereo, CD player,
tape deck, etc.
Powered speakers
(rear) or amplifier
Powered speakers (front),
headphones, or amplifier
MIDI device
If you are connecting a 2-speaker
system to the audio card, use the
Line Out connector (third from
the top).