Filter
Top Products
54
NOTE: e charger’s operation is independent of the inverter. With the inverter in OFF mode,
the charger can be set to come on when AC is available, but have the inverter stay o when AC
is disconnected.
<OFF> disables all charger functions in the FX.
<AUTO> enables automatic battery charging, silent, and “re-oat” when an AC input source is
connected.
<ON> also recharges the batteries, but eventually remains in the “oat” charging stage (and
eliminates silent mode) until the AC input is disconnected.
<OK> returns to the point in the menu system where you entered the CHARGER CONTROL
screen.
PRESS FOUR TIMES:
CHARGER MODE CONTROL
global charger mode
BULK EQ OK
• e CHARGER MODE CONTROL screen
appears allowing the MATE to issue system
(global) recharging commands.
• Pressing <BULK> brings up the BULK
CONTROL screen and starts a new recharging
cycle. Please see the FX and Charge Controller
product manuals for more information.
e BULK CONTROL
screen allows the user to
manually start or stop a bulk
charge cycle by pressing the
<START> or <STOP> so
keys respectively.
NOTE: Both Outback Charge Controller and FX products connected to the HUB will respond
to global EQ and BULK charger commands.
NOTE: Global commands apply to the Charge Controllers and FXs connected to a HUB.
BULK CONTROL
START STOP OK
BULK CONTROL
bulk charge started
OK MAIN
BULK CONTROL
bulk charge stopped
OK MAIN