Filter
Top Products
Main
Unit
Front
DCP Rear Panel
OCP
connector
A CAUTION
Note:
•
If
the
DCP
is dirty,
wipe
off
the
dirt
with a soft,
dry
cloth
only.
• The DCP can
easily
be
damaged
by
shocks.
After
removing
it, be
careful
not
to
drop
it
or
subject
it
to
strong
shocks.
• When
the
Release
button
is
pressed
and
the
DCP
is
unlocked,
the
car's
vibrations
may
cause
it
to
fall.
To
prevent
damage
to
the
DCP,
always
store
it
in
its
case
after
detaching
it.
• The
connector
connecting
the
main
unit
and
the
DCP
is
an
extremely
important
part. Be careful
not
to
damage
it
by
pressing
on
it
with
fingernails,
pens,
screwdrivers,
etc.
Storing
the
DCP
in
the DCP Case
Hold the DCP,
in
the orientation as shown
in
the
figure below, and put it into the supplied DCP
case. (Ensure the DCP is
in
the correct
orientation.)
4.
DCP
(DETACHABLE
CONTROL
PANEL)
Attaching
the
DCP
1.
Insert the right side of the OCP into the main
unit.
2.
Insert the left side of the DCP into the main
unit.
*
The
OCP
is
unlocked
3.
Remove the OCP.
Removing
the
DCP
1.
Press the [SRC] button for 1 second or
longer to switch off the power.
2.
Press
in
the [RELEASE] button.
[RELEASE] button
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in
the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
OXZ385USB
9