Clarion DXZ385US8 Stereo Receiver User Manual


 
Satellite Radio Operations
Recalling
a preset station
A total of 18 satellite radio stations can be
stored.
XM: 6-XM1, 6-XM2 and 6-XM3
SIRIUS: 6-SR1, 6-SR2 and 6-SR3
This allows you to store your favorite satellite
radio stations in memory for later recall.
1.
Press the [BND] button to select the desired
band.
2.
Press the [
...
] /
[..-]
button or [DIRECT]
button to select the desired preset station.
Preset memory
1.
Press the [BND] button to select the desired
band.
2.
Select the desired channel with quick tuning
or
step tuning.
3.
Press and hold the [DIRECT] button for 2
seconds or longer to store the current
channel into preset memory.
Receiving stations selected
by
category
Satellite Radio allows you to select broadcast
channel category (contents).
1.
Press and hold the [BND] button for 1
second
or
longer to select the category
selection mode.
*
It
press
once
again, return
to
the channel
selection
mode.
2.
Press the [
...
]
or
[..-]
button to change the
category item.
3.
Press the
[~]
or
[~]
button to tune in a
station.
Notes:
When
the category selection mode is entered,
the category
of
the last received channel is
displayed first.
The
category selection mode is canceled when
no channel with the selected category can be
found.
The
[~J
or
~J
button are not pressed within
7 seconds, the category selection mode is
canceled,
and
resumes to the channel mode.
Presetting a category
A category can be preset by registering specific
categories in
[DIRECT] buttons 1 to
6.
Then the
desired category can be recalled by pressing
the corresponding [DIRECT] button.
1.
Press and hold the [BND] button for 1
second or longer to enter the category mode.
2.
Press the L...] or
[..-]
button to select a
category.
3.
Press and hold one of the [DIRECT] buttons
for 2 seconds
or
longer to store the current
category into preset memory.
Notes:
When
the name
of
a channel stored
in
memory
is
changed
by
a broadcasting channel, the display
may show
a channel name that differs from the
stored name.
A channel stored
in
memory may be
discontinued
at
the option
of
the broadcasting
channel.
If
no operation is performed for more than 1
second, category seek tuning can automatically
tune
in
a receivable broadcast channel category.
Scan function
There are two scan modes: the category scan
mode and the preset scan mode.
During scanning channels are displayed
in
abbreviated form, the display mode cannot be
switched.
Preset
scan
(PRESET SCN)
A preset scan scans the channels (up to 18
channels) stored
in
the preset memory about
every 10 seconds.
Press and hold the
[rrJ~]
button for 1 second
or
longer to select the preset scan mode.
And start the preset scanning.
Category
scan
(CAT SCN)
In
a category scan, broadcast channels in the
same category as the current channel are
selected about every 10 seconds.
Press the
[rrJ~]
button to select the category
scan mode. And start the category scanning.
Note:
Category scanning is not available when no
category is defined for the current channel.
DXZ385USB
31