Filter
Top Products
Basic Operations
Sound Adjustment
You can adjust a sound effect
or
tone quality to
your preference.
To change
sound
setting
1.
Press the [SOUND] button to switch to the
sound adjustment selection display.
* The factory default sound setting
is
"Z-
EHCR".
2.
Then press the
[~
....
] or
[~]
button to
select the sound adjustment mode.
Each time you press the
[~]
or
[~]
button, the sound adjustment mode
changes as following order:
"Z-EHCR"
+--+
"BASS"
+--+
"TREBLE"
+--+
"BALANCE"
+--+
"FADER"
+--+
"S-W LPF"
+--+
"S-W VOL"
+--+
"HPF"
*
In
the
case of display blinking
"ENT",
you
can
press the
[:-r1~]
button
to
adjust the
setting value.
*
The
sound adjustment
mode
will
be
displayed for 2 seconds before showing the
sound setting.
3.
Press the
LA]
or
[T]
button to adjust the
selected audio mode.
4.
After completing settings, press the
[SOUND] button to return to the previous
mode.
• Setting
the
Z-Enhancer Plus
This unit is provided with 4 types of sound tone
effects stored
in
memory.
Select the one you prefer.
*
The
factory default setting
is
"OFF".
2-1. Select "Z-EHCR".
3-1. Each time you press the
[A]
or
[T]
button,
the tone effect changes in the following
order:
"Z+FLAT"
+--+
"CUSTOM"
+--+
"EXCITE"
+--+
"IMPACT'
+--+
"B-BOOST'
+--+
"OFF"
Z+FLAT
:
userZ+FLAT
CUSTOM : user custom
EXCITE : bass and treble emphasized
mid emphasized
IMPACT
: bass and treble emphasized
B-BOOST : bass emphasized
OFF : no sound effect
14 DXZ385US8
When
"Z+FLAT"
is
set:
3-2. Press and hold the
[~r1~]
button for 1second
or longer, bass/treble characteristics
become flat and switch to the
"CUSTOM"
mode.
When
"CUSTOM"
is
set:
3-1. Press the
[~]
or
[~]
button to select the
"BASS" or "TREBLE" mode to adjust.
When
"EXCITElIMPACT/B-BOOST"
is
set:
3-2. Press the
[:-NI~]
button.
3-3. Press the
[A]
or
[T]
button to adjust the
setting in the range of
-3
to +3.
* The factory default setting
is
"0".
3-4. Press the
[~NI~]
button to return to the
previous mode.
•
Adjusting
the
bass
This adjustment can be performed only when
the Z-Enhancer Plus is set to "CUSTOM
".
2-1. Select "BASS".
3-1. Press the
[A]
or
[T]
button to select as
following order.
"BASS<G>"
+--+
"BASS<F>" .-. "BASS<Q>"
* The factory default setting
is
"BASS<G>".
3-2. Press the
[:-r1~
] button.
3-3. Press the
[A]
or
[T]
button to adjust the
gain, the F (center frequency) and the
Q.
BASS<G>
: The factory default setting is "0".
(Adjustment range: +7 to
-7)
BASS<F>
: The factory default setting
is
"60".
(Adjustment range: 60/80/100/200)
BASS<Q>
: The factory default setting is "1".
(Adjustment range: 1/1.25/1.5/2)
3-4. Press the
[:-r1~]
button to return to the
previous mode.