Filter
Top Products
DVD Changer Operations
By connecting an optional DVD changer that
supports CeNET wiring, this unit can be used to
control the DVD changer. To view DVDs, an
optional monitor
is
required.
• The DVD control and display functions
supported by this unit are limited; the unit
does not support all the functions possible on
a DVD changer.
For fullest functionality, use the remote
control unit provided with your DVD changer
to control its operations. For details, consult
the Owner's Manual provided with your DVD
changer.
TV
Operations
Note:
•
The
following operations are performed the same
as for radio mode:
*Channel
selection
*Storing
channels
in
memory
*Calling
channels
from
memory
*Auto
store
*Preset
scan
See "Radio
Operations"
(page 16-17) for details.
TV
tuner
functions
When
an
optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner and
monitor.
Watching a
TV
1.
Press the [SRC] button and select the TV
mode.
2.
Press the [BND] button to select the desired
TV band
(TV1
or TV2). Each time the button
is
pressed, the input selection toggles
between
TV1
and TV2.
3.
Press the
[~]
or
[~]
button to tune in the
desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
* The factory default setting
is
"TV".
Note:
•
The
following operations are the same as for CD
and
CD Changer modes:
*Pause
*Track
selection
*Fast-forwardlfast-backward
*Scan
play
*Repeat
play
*Random
play
See "CDIMP3IWMAIAAC
Operations"
(page 18-
21)
and
"CD
Changer
Operations"
(page 32) for
details.
1.
Press and hold the [DISP] button for 1
second or longer to switch to the adjustment
selection display.
2.
Press the
[~]
or
[~~]
button to select "TV!
VTR".
3.
Press and hold the
[:-J~]
button for 1 second
or longer to set to "VTR".
4.
To return to the TV broadcast, press and
hold the [DISP] button for 1 second or longer
to switch to the adjustment selection display.
5.
Press the
[~]
or
[~~]
button to select "TV!
VTR".
6.
Press and hold the
[:-J~]
button for 1 second
or longer to set to "TV".
Setting the
TV
diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
*
The
factory default setting
is
"ON".
1. Press and hold the [DISP] button for 1
second or longer to switch to the adjustment
selection display.
2.
Press the
[~]
or
[~]
button to select "TV
DIVER".
3.
Press the
[A]
or
[T]
button to set to "ON" or
"OFF".
• ON:
Sets the diver setting to ON.
• OFF:
Sets the diver setting to OFF.
4.
Press the [DISP] button to return to the
previous mode.
DXZ385US8 33