37
Other Settings
TUNER METRONOME MODE
Editing procedure
1. Simultaneously press pedals [1] and [2].
The tuner function and the metronome function will turn on.
2. Use knobs [1], [4]–[8] to specify the settings.
3. Simultaneously press pedals [1] and [2] to return to
the Play screen.
You can also return to the Play screen by pressing the [EXIT]
button.
TUNER
Here you can make settings for the TUNER mode.
Parameter Value Explanation
PITCH 435 Hz–445 Hz Species the reference pitch.
OUTPUT
MUTE Sound will not be output while tuning.
BYPASS
While tuning, the sound of the guitar being
input to the GT-100 will be output without
change. All eects will be o.
THRU
Allows you to tune while hearing the
current eect sound.
METRONOME
Here you can make settings for the METRONOME mode.
Parameter Value Explanation
TEMPO 40–250 Species the tempo of the metronome.
BEAT
1/1–8/1,
1/2–8/2,
1/4–8/4,
1/8–8/8
Selects the time signature.
ON/OFF OFF, ON Turns the metronome on/o.
LEVEL 0–100 Adjusts the volume of the metronome.
MANUAL MODE
Editing procedure
1. Simultaneously press pedals [BANK DOWN] and
[BANK UP].
The MANUAL mode will turn on.
2. Use knobs [1]–[8] to specify the settings.
3. Simultaneously press pedals [BANK DOWN] and
[BANK UP] to return to the Play screen.
Here you can make settings for the MANUAL mode.
Parameter Value Explanation
BANK DOWN
OFF, ACCEL, PL (PHRASE LOOP),
PL R/P, PL S/P, PL CLR, CH A/B,
OD SOLO, A/B SOLO, A&B SOLO,
CMP, OD, PREAMP, EQ, FX1, FX2,
DLY, CHO, REV, PDL FX, S/R,
AMP CTL, TUNER, MANUAL,
BPM TAP, DLY TAP,
MIDI (MIDI START), MMC PLAY,
LEV +10, LEV +20, LEV -10, LEV -20,
NUM INC, NUM DEC,
BANK INC, BANK DEC
You can assign the desired
eects unit to each pedal.
BANK UP
NUMBER
PEDAL 1
NUMBER
PEDAL 2
NUMBER
PEDAL 3
NUMBER
PEDAL 4
PHRASE LOOP
ACCEL/CTL