EFFECT
16
TREMOLO
Tremolo is an eect that creates a cyclic change in volume.
Parameter Value Explanation
WAVE SHAPE 0–100
Adjusts changes in volume level. A higher
value will steepen wave’s shape.
RATE
0–100,
BPM
–
Adjusts the frequency (speed) of the change.
* When set to BPM, the value of each
parameter will be set according to the
value of the “MASTER BPM” specied for
each patch. This makes it easier to achieve
eect sound settings that match the tempo
of the song.
* If, due to the tempo, the time is longer than
the range of allowable settings, it is then
synchronized to a period either 1/2 or 1/4
of that time.
DEPTH 0–100 Adjusts the depth of the eect.
LEVEL 0–100 Adjusts the volume.
ROTARY
This produces an eect like the sound of a rotary speaker.
Parameter Value Explanation
SPEED
SELECT
SLOW, FAST
This parameter changes the simulated
speaker’s rotating speed (SLOW or FAST).
RATE-SLOW
0–100,
BPM
–
This parameter adjusts the SPEED SELECT of
rotation when set to “SLOW.”
RATE-FAST
0–100,
BPM
–
This parameter adjusts the SPEED SELECT of
rotation when set to “FAST.”
* When set to BPM, the value of each
parameter will be set according to the
value of the “MASTER BPM” specied for
each patch. This makes it easier to achieve
eect sound settings that match the tempo
of the song.
* If, due to the tempo, the time is longer than
the range of allowable settings, it is then
synchronized to a period either 1/2 or 1/4
of that time.
DEPTH 0–100
This parameter adjusts the amount of depth
in the rotary eect.
RISE TIME 0–100
This parameter adjusts the time it takes for
the rotation SPEED SELECT to change when
switched from “SLOW” to “FAST.”
FALL TIME 0–100
This parameter adjusts the time it takes for
the rotation SPEED SELECT to change when
switched from “FAST” to “SLOW.”
LEVEL 0–100 Adjusts the volume.
UNI-V
This models a Uni-Vibe.
Although this resembles a phaser eect, it also provides a unique
undulation that you can’t get with a regular phaser.
Parameter Value Explanation
RATE
0–100,
BPM
–
Adjusts the rate of the UNI-V eect.
* When set to BPM, the value of each
parameter will be set according to the
value of the “MASTER BPM” specied for
each patch. This makes it easier to achieve
eect sound settings that match the tempo
of the song.
* If, due to the tempo, the time is longer than
the range of allowable settings, it is then
synchronized to a period either 1/2 or 1/4
of that time.
DEPTH 0–100 Adjusts the depth of the UNI-V eect.
LEVEL 0–100 Adjusts the volume.
PAN
With the volume level of the left and right sides alternately changing,
when playing sound in stereo, you can get an eect that makes the guitar
sound appear to y back and forth between the speakers.
Parameter Value Explanation
TYPE
AUTO
This varies the volume level on the left and
right according to the settings for WAVE
SHAPE, RATE, and DEPTH.
MANUAL
Output uses the volume balance set with
POS.
WAVE SHAPE
*1
0–100
Adjusts changes in volume level.
A higher value will steepen wave’s shape.
RATE *1
0–100,
BPM
–
Adjusts the frequency (speed) of the change.
* When set to BPM, the value of each
parameter will be set according to the
value of the “MASTER BPM” specied for
each patch. This makes it easier to achieve
eect sound settings that match the tempo
of the song.
* If, due to the tempo, the time is longer than
the range of allowable settings, it is then
synchronized to a period either 1/2 or 1/4
of that time.
DEPTH *1 0–100 Adjusts the depth of the eect.
POS *2
L 100–CENTER–
R 100
This adjusts the volume balance between the
left and right channels.
LEVEL 0–100 Adjusts the volume.
*1 Setting available when TYPE is set to AUTO.
*2 Setting available when TYPE is set to MANUAL.