Filter
Top Products
Using
Direct-To
Pressing the DIRECT-TO key sets your present
position as the FROM location. When using the
Direct-To function, the FROM waypoint identifier is
overwritten with the word “Direct.” If you remove the
Direct-To position with the Del? option, the old
FROM waypoint is returned to that position. If you
edit the FROM position, Direct-To navigation will be
replaced by the new entered waypoint.
Direct-To Defaults
When you press
DIRECT-TO, the default waypoint
shown will be the current TO waypoint in the Nav or
Flight Plan functions or the waypoint displayed in the
Database or Info functions.
Function DIRECT-TO Waypoint Default
Nav
Current TO waypoint
Database
Displayed waypoint
Flight Plan
Displayed leg TO waypoint
Info
Displayed waypoint
You can always select a different Direct-To waypoint,
but the default is a useful starting point. While
viewing the default waypoint, press
DIRECT-TO and
then
ENTER to navigate directly to that waypoint.
3-31
Navigation Basics
FROM
W
PT
Present
Po sit i on
TO
WPT
Direct-To
Route
Direct-To
Waypoint