Filter
Top Products
Create User
Waypoint by
Lat/Lon
The Apollo GX allows you to create up to 500 of your
own waypoints to the waypoint database. You can
create a waypoint based on a Lat/Lon or using a
radial and distance from another waypoint. The
starting Lat/Lon coordinates are your present position
You can also add the runway length. Unlike normal
database waypoints a User waypoint with a runway of
0 length will appear in the nearest list and on the
map if a length is set for the runway limit in the
Nearest Search function, see page 12.
1. Press the
DB soft key. Turn the LARGE knob to view
the “Create User Wpt By Lat/Lon” page, and then
press
ENTER.
Create User Wpt
by Lat/Lon
Press ENT
2. The first character of the waypoint name will flash.
Turn the
SMALL knob to select the desired character.
#000 USER
44°24.29N Rwlen
122°51.52W 0000’
3. Turn the
LARGE knob clockwise one click to move
to the next character. Turn the
SMALL knob to
select the desired character. Continue to select the
needed characters for the Waypoint Name,
Latitude, Longitude, and Runway Length.
H000 USER
44°24.29N Rwlen
122°51.52W 0000’
Note
The default Lat/Lon is your present
position. This makes it easy to “mark” a
location.
5-9
Waypoint Database
DB
ENTER