Filter
Top Products
Enable Approach (GX50/60 Only)
This option is available on the Flight Plan home page
when an approach is already loaded, but not enabled,
and you are within approximately 30 nm of the
destination airport. Press
ENTER to enable the
approach.
*Active* 56.1nm
Dest Wpt: PDX
Enable Approach?
Disable Approach (GX50/60 Only)
This option is available on the Flight Plan home page
when an approach is already loaded and enabled.
Press
ENTER to cancel the Approach Transition flight
mode and return the GX50/60 to Terminal flight
mode.
*Active* 56.1nm
Dest Wpt: PDX
Disable Appr?
Destination
Waypoint
Information
Normal waypoint information about the destination
waypoint can be viewed by pressing
INFO when the
Plan Name Page is displayed. This is the same as
pressing
INFO to view information about a TO
waypoint, except that the Plan Comment page is
available by turning the
SMALL knob.
PDT AIRPORT
Public
elev 1493ft
Flight Plan
Comments
A flight plan comment page can be viewed and edited
for each flight plan by pressing
INFO when the Plan
Name Page is displayed and the turning the
LARGE
knob.
If no plan comment has been entered, press
SEL to
create one.
6-23
Flight Plan Functions